Skip to content
01 / CONFIGURATION
2 Heads
| Configuration | Length | Projection / W | Height |
|---|---|---|---|
| 2 Heads | 38 cm / 15″ | 20 cm / 7.9″ | 23.5 cm / 9.3″ |
Orlisse Veined Globe Wall Sconce
$686.00
2 Heads L 15″ x W 7.9″ x H 9.3″ / White + Gold
- 2 Heads L 15″ x W 7.9″ x H 9.3″ / White + Gold
- 2 Heads L 15″ x W 7.9″ x H 9.3″ / White + Black
- 2 Heads L 15″ x W 7.9″ x H 9.3″ / White + Nickel
- 2 Heads L 15″ x W 7.9″ x H 9.3″ *2 / White + Gold
- 2 Heads L 15″ x W 7.9″ x H 9.3″ *2 / White + Black
- 2 Heads L 15″ x W 7.9″ x H 9.3″ *2 / White + Nickel
- 3 Heads L 24″ x W 7.9″ x H 9.3″ / White + Gold
- 3 Heads L 24″ x W 7.9″ x H 9.3″ / White + Black
- 3 Heads L 24″ x W 7.9″ x H 9.3″ / White + Nickel
- 3 Heads L 24″ x W 7.9″ x H 9.3″ *2 / White + Gold
- 3 Heads L 24″ x W 7.9″ x H 9.3″ *2 / White + Black
- 3 Heads L 24″ x W 7.9″ x H 9.3″ *2 / White + Nickel
Orlisse Veined Globe Wall Sconce
Product Description
01 / The Orlisse Collection · Severnlighting
Stone by nature.
Stone by nature.
Warmth by design.
Orlisse Alabaster Globe Wall Sconce
A quiet evening. A softer glow. Natural alabaster globes bring warmth and sculptural character to your wall.
A brass frame, 3000K warm white light, and two or three heads. Choose gold, black or nickel for bedrooms, entryways and living rooms.
NATURAL ALABASTER
BRASS FRAME
3000K WARM WHITE
38 / 61cm
2 HEADS / 3 HEADS
3000K
WARM WHITE
G9
LIGHT SOURCE
3
FRAME FINISHES
02 / Severnlighting
Find your proportion.
02 / CONFIGURATION
3 Heads
| Configuration | Length | Projection / W | Height |
|---|---|---|---|
| 3 Heads | 61 cm / 24″ | 20 cm / 7.9″ | 23.5 cm / 9.3″ |
Set of
2
Better together. Better value.
Bring balance to both sides of the bed. A set of two fixtures offers better value than purchasing each fixture separately.
“Set of 2” means two complete wall fixtures. Select the same head count and finish for a coordinated pair.
03 / Severnlighting
The essential details.
Materials
Natural alabaster & brass
Light source
G9
Light color
Warm white · 3000K
Frame finishes
Gold / Black / Nickel
Shade color
White · natural veining
Voltage
AC 110–240V
Environment
Indoor · IP20 · dry locations only
Installation
Wall mounted
Preparation time
Average 5–10 days
Configurations
2 Heads / 3 Heads
Preparation time is separate from shipping time. IP20 provides no water protection. Bulb inclusion, maximum wattage and dimming compatibility should be confirmed before ordering.
04 / Severnlighting
A place beside your evening.
2 Heads · One fixture
Center the 38 cm fixture over the bed. Start with a 20–30 cm (7.9–11.8″) clear gap between the headboard top and the lowest point of the shades. This compact composition works best as decorative ambient light; confirm its spread before relying on it for two readers.
- Fixture width
- 38 cm / 15″
- Clear gap above headboard
- 20–30 cm / 7.9–11.8″
- Fixture projection
- 20 cm / 7.9″
2 Heads · A bedside pair
Place one 38 cm fixture on each side, centered above its nightstand. A starting centerline is 15–25 cm (5.9–9.8″) outside each mattress edge; aim for the shade centers roughly 50–65 cm (19.7–25.6″) above the mattress top, then adjust for seated eye level and reach.
- Fixture width
- 38 cm / 15″
- Center beyond mattress edge
- 15–25 cm / 5.9–9.8″
- Shade centers above mattress
- 50–65 cm / 19.7–25.6″
3 Heads · One fixture
Center the 61 cm fixture above the headboard for a broader horizontal accent. Start with the same 20–30 cm (7.9–11.8″) clear gap above the headboard. Leave room for the full 20 cm (7.9″) projection, and check that the globes clear your head when sitting or standing.
- Fixture width
- 61 cm / 24″
- Clear gap above headboard
- 20–30 cm / 7.9–11.8″
- Fixture projection
- 20 cm / 7.9″
3 Heads · A bedside pair
Allow a wider wall zone for each 61 cm fixture. Start with fixture centerlines 15–25 cm (5.9–9.8″) beyond the mattress edges and shade centers about 50–65 cm (19.7–25.6″) above the mattress. At this spacing, the fixture ends may extend over the bed edge; move outward if needed for headboard and body clearance.
- Fixture width
- 61 cm / 24″
- Center beyond mattress edge
- 15–25 cm / 5.9–9.8″
- Shade centers above mattress
- 50–65 cm / 19.7–25.6″
Planning suggestions, not code requirements or a mounting template. Bed widths are illustrative. Use the actual fixture and bracket to mark drill points. Mock up both the width and 20 cm projection, sit upright on the bed, check glare and head clearance, and have a qualified installer confirm wall support, wiring and local requirements. Above-headboard positions may need to be higher to clear a seated person.
05 / Severnlighting
Considered in every detail.
01 / Alabaster shades
A natural signature.
White stone, subtle mineral markings and a rounded silhouette create depth in daylight and a softly illuminated surface when lit. Veining and translucency vary from shade to shade.
02 / Brass structure
Quiet architectural lines.
The slender brass bar and rounded backplate balance the globes without competing with their pattern. Gold, black and nickel describe finish colors; the frame material is brass.
03 / Before installation
Prepare with confidence.
Confirm dimensions, wall support, supply voltage and the correct G9 lamp specification. Isolate power before any work; a qualified installer should verify mounting hardware and complete electrical connections.
06 / Severnlighting
Why does stone seem to glow?
The light comes from within.
Alabaster is naturally translucent. When the G9 light source is switched on, some light passes through the stone shell and is scattered, giving the globe a softly luminous appearance.
The stone does not generate light itself. Its thickness, natural markings and the lamp output influence how bright and even the shade looks. The specified 3000K warm white light brings a warm character to the white globes.
07 / Severnlighting
From raw stone to soft light.
Selection
Choose stone for its natural character and suitability for a translucent shade. Mineral markings become part of the design.
Cutting
Cut the selected material into workable blanks sized for the globe form.
Sculpting
Shape the rounded exterior and form the internal cavity for the light source and fitting.
Polishing
Refine and smooth the surface to reveal the stone’s color and natural veining.
Assembly
Fit the shades to the brass structure and assemble the fixture for its final form.
08 / Severnlighting
No two globes tell the same story.
Nature creates the pattern.
Cloudy white areas, fine veins and warmer mineral tones are part of natural alabaster. Their placement and visibility differ between shades, and may look different with the light on or off.
Product photography illustrates the material’s character; it does not guarantee an identical pattern. If you prefer lighter veining, stronger contrast or a coordinated pair, contact us about customization before ordering. Selection depends on available stone, and an exact pattern match cannot be guaranteed.
REQUEST YOUR PREFERRED VEINING →
09 / Severnlighting
Choose the character of your light.
| Quality | Natural alabaster | Glass | Acrylic | Fabric |
|---|---|---|---|---|
| Visual character | Natural mineral veining; every shade differs | Clear, frosted, colored or textured finishes | Often consistent color and finish | Woven texture and a soft decorative appearance |
| Light appearance | Translucent stone with visible depth and tonal variation | Ranges from clear transmission to frosted diffusion | Can provide even diffusion, depending on formulation | Filtered light through the weave; output depends on lining |
| When switched off | A sculptural stone feature with an individual pattern | Reflective, transparent or opaque depending on finish | Lightweight visual forms with repeatable finishes | A tactile textile accent |
| Practical trade-off | Heavier and sensitive to moisture, impact and harsh cleaners | Breakable; dust and fingerprints may show | Lighter; can scratch and has heat limits | Can collect dust and absorb stains |
| Best reason to choose | Natural individuality and a softly luminous stone surface | A broad choice of optical effects | Low weight and flexible forms | A textile-led decorative scheme |
General material comparison. Light output, heat tolerance and service life depend on the specific shade, lamp and fixture design. Alabaster’s appeal is its natural character rather than a claim of universal superiority.
10 / Severnlighting
Good questions. Clear answers.
What is Orlisse made from?
The shades are natural alabaster and the frame is brass. Gold, black and nickel are the available frame finish colors. The white alabaster may include warmer mineral markings and irregular veins; these natural differences contribute to the individual appearance of each fixture.
Should I choose two heads or three?
The two-head version measures L 38 × W 20 × H 23.5 cm (15 × 7.9 × 9.3″). The three-head version measures L 61 × W 20 × H 23.5 cm (24 × 7.9 × 9.3″). Choose by available wall width, bedside table size and the composition you want. More heads do not establish a specific lumen output; confirm lamp output for task lighting.
What light source and color temperature does it use?
Orlisse uses a G9 light source, with a specified warm white color temperature of 3000K. Confirm bulb inclusion, maximum permitted wattage and lamp dimensions before purchase. Replacement lamps must match the fixture rating, local voltage and available shade clearance; the G9 base alone does not establish compatibility.
Is the wall sconce dimmable?
Dimming has not been specified for this configuration. It depends on compatible dimmable G9 lamps and a suitable dimmer, as well as the supplied fixture components. Contact us before ordering if dimming is essential, so the intended lamps and control system can be checked together.
Can I install it in a bathroom or outdoors?
This fixture is rated IP20 for indoor dry locations and has no water protection. Do not place it where it may be splashed, exposed to steam or used outdoors. Any proposed bathroom location requires a qualified installer to assess local electrical zones and requirements; IP20 must not be treated as a wet-location rating.
How should it be positioned beside a bed?
Use the four diagrams as starting points, then check the actual bed, nightstands, headboard and seated eye level. The 20 cm projection is especially important for head clearance. A pair should normally align with the bedside furniture, while a single central fixture should clear both the headboard and the person sitting beneath it. Final mounting height is site-specific.
Will the shades match the photos or each other?
Natural alabaster varies in veining, tone and translucency. Two shades can complement each other without matching exactly. If you need a particular pattern direction or a more coordinated pair, request customization before ordering. Feasibility depends on the available material; exact duplication of a photographed vein pattern is not guaranteed.
How do I clean the alabaster and frame?
Switch off power and let the fixture cool. Dust gently with a clean, soft, dry cloth, and support the stone without twisting the fittings. Avoid soaking, steam, abrasive pads, acids and harsh cleaners. Alabaster is a sensitive stone, so ask us before attempting to remove a stain or using any liquid product.
What should be prepared before installation?
Ask a qualified installer to verify wall strength, the fixing method, electrical connections and local requirements. The specified fixture voltage is AC 110–240V, but the selected G9 lamp must also suit the local supply. Isolate the circuit before work, and use the supplied fixture and installation instructions to mark the final mounting points.
How long is preparation, and what does Set of 2 mean?
Average preparation time is 5–10 days before dispatch; transit time is additional. A Set of 2 means two complete wall fixtures and offers better value than buying the fixtures individually. Choose the same head count and finish for a coordinated pair. Ask for a separate estimate if you request particular stone patterns or other customization.
SEVERNLIGHTING · ORLISSE · Natural stone. Individual character.
Shipping Policy
Shipping Methods:
- Free Standard Shipping: Free on all orders, with an estimated delivery time of 20-30 business days. We ship to the continental United States (48 contiguous states) only — we are unable to ship to Alaska, Hawaii, P.O. Boxes, or APO/FPO addresses.
- Expedited Shipping: Express service with a shipping time of 10-20 business days. Fees are tiered by order value, starting at $80 for orders up to $200 and rising to $760 for orders up to $2,000. For orders above $2,000, contact us for a custom quote.
- Order Processing Time: Orders are typically processed within 5-10 business days, including inventory verification, packaging, and inspection. Made-to-order pieces require an additional 5-12 business days in production. During peak seasons or promotions, please allow 1-3 business days of additional processing time.
- Carriers & Tracking: We ship with UPS, FedEx, and USPS. Every order includes full shipping insurance and package tracking. Your tracking number is emailed to you as soon as the package leaves our facility.
- Duties & Taxes: All applicable U.S. customs duties and import taxes are covered by SevernLighting. The price you see at checkout is the final price you pay.
Delivery Issues:
- Tracking Not Updating: If there is no movement on your tracking for 2-3 weeks, contact us and we will investigate with the carrier.
- Address Errors: Please double-check your address at checkout. We cannot be responsible for packages lost or misdelivered due to an incorrect address. Once shipped, address changes are not guaranteed and carriers may charge a fee.
- Marked Delivered but Missing: Check around your property and with neighbors first. If the package is still missing after 7 days, contact us and we will assist.
- Out-of-Stock Items: If an item is unavailable, we will notify you by email as soon as possible. You may wait for restock or cancel for a full refund. Your payment method is only charged once the item ships.
- Please Note: Fixtures are assembled and dispatched from our manufacturing facility in Guangdong, China. All delivery timeframes are estimates — customs clearance and local postal processing can cause delays beyond our control.
Questions about a shipment? Email us at kay@severnlighting.com
Refund & Return Policy
Return and Exchange Policy:
- 30-Day Return & Exchange Window: Contact us within 30 days of receiving your order for a return or exchange, based on the delivery date confirmed in your tracking record. Requests submitted after 30 days cannot be processed.
- Eligibility: Items must be unused and in original condition with all tags, labels, packaging, accessories, and manuals intact. Fixtures requiring assembly must be returned unassembled — pieces that have been installed, or that have damaged wiring or loosened components, are not eligible. A valid order number or proof of purchase is required.
- Non-Returnable Items: Made-to-order, customized, and personalized pieces; light bulbs and consumables once opened; items no longer in original condition or with damaged packaging; and final sale items.
Return Shipping Costs:
- Our Responsibility: If the return is due to a product quality issue, manufacturing defect, shipping damage, incorrect delivery, or a package returned to sender undelivered, we cover all return shipping costs including any applicable customs fees, and issue a full refund or a free replacement.
- Customer Responsibility: If the return is based on personal preference — color, design, or features not matching expectations, size judged incorrectly, change of mind, or ordering the wrong item, model, or quantity — the customer covers return shipping and any related customs fees.
Exchanges & Cancellations:
- Exchanges: The fastest route is to return the original piece, then place a new order once the return is approved. For quality or damage issues we cover both directions; for personal-preference exchanges, the customer covers return shipping on the original plus the full price of the new piece.
- Order Cancellation: Stock items can be cancelled free of charge within 24 hours. After 24 hours but before shipping, a $50 handling fee applies. Once shipped, orders cannot be cancelled — please follow the return process instead. Made-to-order pieces cannot be cancelled once confirmed, as production begins immediately.
How to Start a Return:
- Step 1 — Submit your request: Email kay@severnlighting.com within 30 days with your order number, the items involved, a detailed reason for the return, and photos of any damage or issue.
- Step 2 — Receive your RMA number: We will issue a Return Merchandise Authorization number along with the return address. Returns sent without prior authorization cannot be accepted or processed.
- Step 3 — Pack and ship: Repack the piece securely in its original packaging with all accessories and a copy of your order confirmation. Mark the RMA number clearly on the outside of the parcel, then email us the return tracking number.
- Step 4 — Inspection: We inspect returned pieces within 3-5 business days of arrival and confirm approval by email.
Refund Processing:
- Timing: Refunds are issued automatically to your original payment method — typically 1-3 business days for PayPal and 5-7 business days for credit or debit cards. Your bank may need additional time to post the credit. If you have not received your refund within 15 business days of approval, email us with your order number.
- Return Address: Returns are received at our facility in Jiangmen, Guangdong, China. For customer-initiated returns, please factor international return shipping into your decision — we will confirm the full address and estimated cost when we issue your RMA number.
Questions about returns or refunds? Email us at kay@severnlighting.com
Customer photo
1 / 1
No reviews yet. Be the first to share how it looks in your home.