
Modern Alabaster Petra Wall Lamp
$335.00
- Two floors: Dia 13cm x H 30cm / ∅ 5.1″ x H 11.8″ / Gold
- Three floors: Dia 13cm x H 40cm / ∅ 5.1″ x H 15.8″ / Gold
- Five floors: Dia 13cm x H 52cm / ∅ 5.1″ x H 20.5″ / Gold
- Seven floors: Dia 13cm x H 72cm / ∅ 5.1″ x H 28.4″ / Gold
- Nine floors: Dia 13cm x H 92cm / ∅ 5.1″ x H 36.2″ / Gold
- Two floors: Dia 13cm x H 30cm / ∅ 5.1″ x H 11.8″*2 / Gold
- Three floors: Dia 13cm x H 40cm / ∅ 5.1″ x H 15.8″*2 / Gold
- Five floors: Dia 13cm x H 52cm / ∅ 5.1″ x H 20.5″*2 / Gold
- Seven floors: Dia 13cm x H 72cm / ∅ 5.1″ x H 28.4″*2 / Gold
- Nine floors: Dia 13cm x H 92cm / ∅ 5.1″ x H 36.2″*2 / Gold
Modern Alabaster Petra Wall Lamp
Product Description
SevernLighting
Modern Alabaster Petra Wall Lamp
Slices of natural alabaster, stacked into a column of warm light.
The Modern Alabaster Petra Wall Lamp stacks irregular slices of natural alabaster along a slim gold backplate, each one held by a small brass pin. The LEDs sit behind the stone, so what you see is a soft, even glow through every slice rather than a bright point. It comes in five heights on the same 5.1″ width, so one look can work beside a bed, on either side of a mirror, or up a tall living room wall.
Heights
11.8″ to 36.2″
Width
5.1″ on every size
Light
Integrated LED, warm light
Buy as
Single lamp or set of two
Five Heights, One Width
The width stays at 5.1″; only the number of stone slices changes.
2 Tiers
Dia 13 cm x H 30 cm
Ø 5.1″ x H 11.8″
Bedside, narrow hallway
3 Tiers
Dia 13 cm x H 40 cm
Ø 5.1″ x H 15.8″
Bedside, entry wall
5 Tiers
Dia 13 cm x H 52 cm
Ø 5.1″ x H 20.5″
Beside a mirror, study wall
7 Tiers
Dia 13 cm x H 72 cm
Ø 5.1″ x H 28.4″
Living room, dining room
9 Tiers
Dia 13 cm x H 92 cm
Ø 5.1″ x H 36.2″
Stairwell, tall walls
Every height is also offered as a set of two — choose the set option at checkout if you are lighting both sides of a bed, mirror, or fireplace.
Match the Size to Your Wall
Drawn to scale: the taller your ceiling, the more tiers the wall can carry.
Fixture Details
Specifications
Material
Natural alabaster, brass
Color
Gold with white alabaster
Style
Modern
Light Source
Integrated LED
Light Color
Warm light (3000K)
Dimming
Not dimmable
Voltage
AC 110–240V
Installation
Hardwired, vertical wall mount
Control
Compatible with a wall switch (not included)
Sizes
2, 3, 5, 7 or 9 tiers
Width
Ø 5.1″ (13 cm) on every size
Options
Single lamp or set of two
Downloads
Installation steps and the full specification sheet, ready to pass to your electrician.
Where It Fits Best
Tall and narrow, it lights a wall without taking floor or table space.
★ Best Fit
A pair flanking the fireplace
One lamp on each side of the mantel frames the fireplace and keeps warm light at eye level after the ceiling lights go off.
Also Shines In
✦ Either side of a vanity mirror
✦ Beside framed art on a study wall
✦ Along a hallway
✦ Up a stair wall
✦ In a dining room
Finding Your Fit
Mount it vertically and center it about 60–66″ above the floor, or level with the center of a mirror you are flanking. The 2- and 3-tier sizes suit bedside and hallway walls; save the 7- and 9-tier sizes for tall walls and stairwells.
Set of two, one on each side of a vanity mirror
A single five-tier lamp beside framed art in a study
Mounting height for a pair beside a mirror
How the Light Falls
The LEDs are mounted on the backplate, behind the stone. Part of the light passes through each slice as a soft glow; the rest escapes around the edges and lands on the wall, so the lamp lights its own surroundings as well as itself.
A halo on the wall
Light spills past the slice edges and spreads across the wall around the column.
No bare bulb in view
Every LED sits behind stone, so the light you see has already passed through alabaster.
Texture comes forward
Backlit, the veining and rough edges read clearly, even from across the room.
Unlit: grey clouding and amber veins at the rough edge
Lit: the slice turns warm and glows around the pin
The Stone, Lit and Unlit
Each slice is thin enough for light to pass through, and its edge is left rough rather than polished round. Unlit, the stone shows white with grey clouding and fine amber veins. Switched on, the LEDs behind it turn the whole slice warm and the veins read as soft, darker shading. A small brass pin holds each slice to the gold backplate.
Natural alabaster: no two slices share the same veining, tone or outline, so every Petra lamp is its own piece.
Details Matter
What Makes It Special
01
A column, not a cluster
The slices step down the wall in a single line, so the whole look fits in 5.1″ of width — right for the narrow strip between two windows or beside a mirror.
02
Light from behind the stone
The LEDs sit behind the alabaster, so you see warm light coming through the stone and around each edge, never a bare bright point.
03
One design, five heights
The same slice-and-pin design runs from 11.8″ to 36.2″, and every height is offered as a single lamp or a matched set of two.
Natural Alabaster vs. Composite Marble
What goes into the Petra, and the low-grade stone it is not made from.
★ Used in the Petra lamp
Natural alabaster
Every slice on the Modern Alabaster Petra Wall Lamp is natural alabaster: clean white stone with soft grey clouding that glows warm and even when lit.
Petra: clean white alabaster, lit from behind
Veining
Soft grey clouding and fine amber lines in clean white stone.
Light
Passes through evenly and warmly, so the glow shows depth in the stone.
Edge
A natural, rough break along every slice.
Clear, even stone is what lets the Petra glow without blotches.
✕ Not used in Petra
Low-grade composite marble
A cheaper stand-in found in some stone-look lamps: crushed stone and resin, cast to imitate the real thing.
Composite marble: green and rust specks, patchy glow
Look
Chalky base with muddy grey streaks and scattered green or rust specks.
Light
A dull, patchy glow that hides the texture.
Material
Crushed stone set in resin, so less light gets through.
Green or rust specks and a chalky, dull glow are signs of composite stone.
Caring for Natural Stone
Alabaster is a soft stone that takes on moisture, so dry dusting is all it needs to keep its glow.
Do
✓Switch off the power and let the lamp cool first
✓Dust with a soft dry cloth or a soft brush
✓Handle slices with clean, dry hands during installation
Avoid
✕Water, damp cloths, and steam
✕Sprays, polish, and household cleaners
✕Knocking or pressing on the rough slice edges
Before You Order
Straight answers on size, installation, light and care for the Petra wall lamp.
Still deciding on a height?
Send us your wall height and where the lamp will go: kay@severnlighting.com
Which height should I choose?
+
All five sizes are 5.1″ wide; only the height changes. The 2- and 3-tier (11.8″ and 15.8″) suit bedside walls and narrow hallways, the 5-tier (20.5″) fits beside a mirror or on a study wall, and the 7- and 9-tier (28.4″ and 36.2″) need a tall wall such as a living room or stairwell.
Can I buy a matching pair?
+
Yes. Every height is offered as a set of two, so choose the set option at checkout for both sides of a bed, mirror, or fireplace.
How is it installed, and how high should it go?
+
It is hardwired to a wall junction box and mounts vertically, so plan on a licensed electrician. Center it about 60–66″ above the floor, or level with the center of a mirror you are flanking. Compatible with a wall switch (not included).
What kind of light does it give?
+
Integrated LEDs in warm light (3000K) sit behind the stone, so the glow comes through each slice rather than from a visible bulb. There are no bulbs to buy, and the lamp is not dimmable.
Is every lamp the same?
+
No. Each slice is natural alabaster with its own veining, tone, and rough-cut outline, so no two lamps look exactly alike.
How do I clean it?
+
Switch off the power and dust the slices with a soft dry cloth or brush. Keep water and cleaners off the stone; the care guide above lists what to avoid.
Shipping Policy
Shipping Methods:
- Free Standard Shipping: Free on all orders, with an estimated delivery time of 20-40 business days. We ship to the continental United States (48 contiguous states) only — we are unable to ship to Alaska, Hawaii, P.O. Boxes, or APO/FPO addresses.
- Expedited Shipping: Express service with a shipping time of 9-20 business days. Fees are tiered by order value, starting at $80 for orders up to $200 and rising to $760 for orders up to $2,000. For orders above $2,000, contact us for a custom quote.
- Order Processing Time: Orders are typically processed within 3-5 business days, including inventory verification, packaging, and inspection. Made-to-order pieces require an additional 5-12 business days in production. During peak seasons or promotions, please allow 1-3 business days of additional processing time.
- Carriers & Tracking: We ship with UPS, FedEx, and USPS. Every order includes full shipping insurance and package tracking. Your tracking number is emailed to you as soon as the package leaves our facility.
- Duties & Taxes: All applicable U.S. customs duties and import taxes are covered by SevernLighting. The price you see at checkout is the final price you pay.
Delivery Issues:
- Tracking Not Updating: If there is no movement on your tracking for 2-3 weeks, contact us and we will investigate with the carrier.
- Address Errors: Please double-check your address at checkout. We cannot be responsible for packages lost or misdelivered due to an incorrect address. Once shipped, address changes are not guaranteed and carriers may charge a fee.
- Marked Delivered but Missing: Check around your property and with neighbors first. If the package is still missing after 7 days, contact us and we will assist.
- Out-of-Stock Items: If an item is unavailable, we will notify you by email as soon as possible. You may wait for restock or cancel for a full refund. Your payment method is only charged once the item ships.
- Please Note: Fixtures are assembled and dispatched from our manufacturing facility in Guangdong, China. All delivery timeframes are estimates — customs clearance and local postal processing can cause delays beyond our control.
Questions about a shipment? Email us at kay@severnlighting.com
Refund & Return Policy
Return and Exchange Policy:
- 30-Day Return & Exchange Window: Contact us within 30 days of receiving your order for a return or exchange, based on the delivery date confirmed in your tracking record. Requests submitted after 30 days cannot be processed.
- Eligibility: Items must be unused and in original condition with all tags, labels, packaging, accessories, and manuals intact. Fixtures requiring assembly must be returned unassembled — pieces that have been installed, or that have damaged wiring or loosened components, are not eligible. A valid order number or proof of purchase is required.
- Non-Returnable Items: Made-to-order, customized, and personalized pieces; light bulbs and consumables once opened; items no longer in original condition or with damaged packaging; and final sale items.
Return Shipping Costs:
- Our Responsibility: If the return is due to a product quality issue, manufacturing defect, shipping damage, incorrect delivery, or a package returned to sender undelivered, we cover all return shipping costs including any applicable customs fees, and issue a full refund or a free replacement.
- Customer Responsibility: If the return is based on personal preference — color, design, or features not matching expectations, size judged incorrectly, change of mind, or ordering the wrong item, model, or quantity — the customer covers return shipping and any related customs fees.
Exchanges & Cancellations:
- Exchanges: The fastest route is to return the original piece, then place a new order once the return is approved. For quality or damage issues we cover both directions; for personal-preference exchanges, the customer covers return shipping on the original plus the full price of the new piece.
- Order Cancellation: Stock items can be cancelled free of charge within 24 hours. After 24 hours but before shipping, a $50 handling fee applies. Once shipped, orders cannot be cancelled — please follow the return process instead. Made-to-order pieces cannot be cancelled once confirmed, as production begins immediately.
How to Start a Return:
- Step 1 — Submit your request: Email kay@severnlighting.com within 30 days with your order number, the items involved, a detailed reason for the return, and photos of any damage or issue.
- Step 2 — Receive your RMA number: We will issue a Return Merchandise Authorization number along with the return address. Returns sent without prior authorization cannot be accepted or processed.
- Step 3 — Pack and ship: Repack the piece securely in its original packaging with all accessories and a copy of your order confirmation. Mark the RMA number clearly on the outside of the parcel, then email us the return tracking number.
- Step 4 — Inspection: We inspect returned pieces within 3-5 business days of arrival and confirm approval by email.
Refund Processing:
- Timing: Refunds are issued automatically to your original payment method — typically 1-3 business days for PayPal and 5-7 business days for credit or debit cards. Your bank may need additional time to post the credit. If you have not received your refund within 15 business days of approval, email us with your order number.
- Return Address: Returns are received at our facility in Jiangmen, Guangdong, China. For customer-initiated returns, please factor international return shipping into your decision — we will confirm the full address and estimated cost when we issue your RMA number.
Questions about returns or refunds? Email us at kay@severnlighting.com

















































