SevernLighting

The Merrick Fluted Glass Bell Wall Lamp hangs a ribbed glass bell from a short brass arm on a round backplate, with a knurled key switch standing out at the socket. The glass is fluted down its full height and flares at the rim, so light leaves through dozens of fine vertical ribs rather than one flat surface.

FIXTURE DETAILS

Every part is stripped to essentials — a disc, a straight arm, an elbow, a shade — with the brass left plain so the pattern in the glass does the work. It projects under seven inches from the wall, which keeps it clear of a mirror, a cabinet door or a narrow passage.

Better Together
For a collected, designer-styled room, pair it with matching pieces like the Marlowe Speckled Glass Pendant Lamp.

Measures ∅ 5.7″ × H 10.2″ in brass and clear glass, for hardwired wall installation. Takes one E26/E27 bulb (not included; a 3000K warm white suits it best).

SET OF 2

What "Set of 2" Means

Two complete lights, each with its own hardware, shipped together in one order.

☰

Specifications

Design & Material

MaterialBrass, Glass

FinishGold

Lampshade ColorTransparent

Electrical

Light Source BaseE26 or E27

Rated VoltageAC 110–120V

WiringHardwired

Installation & Rating

MountingWall

Moisture ResistanceIP20, indoor use

ProcessCutting

Control Method Push-button switch (not dimmable)

Dimensions

Size (cm)	Dia 14.5 cm x H 26 cm x W 17 cm
Size (inch)	∅ 5.7″ x H 10.2″ x W 6.7″

✦

Where It Fits Best

Light through dozens of fine glass flutes — plain brass, patterned glass.

Line illustration of the Merrick Fluted Glass Bell Wall Lamp, a ribbed glass bell hanging from a short brass arm on a round backplate with a knurled key switch, mounted beside a round mirror above a console

★ Best Fit

Flanking a Vanity Mirror

A pair set either side at face height lights both cheeks evenly, which is the one thing an overhead fixture cannot do. Under seven inches of projection keeps the bells clear of the mirror edge, and the key switch at the socket means you turn each one on where you stand. Where it looks its very best.

Also Shines In

Kitchen Wall

Beside open shelves or a window.

Narrow Hallway

Shallow enough to walk past.

Over the Bedside

A reading light off the table.

Finding Your Fit

At Ø 5.7″ × H 10.2″ with a 6.7″ projection, Merrick is small enough to use in pairs without crowding a wall. Flanking a mirror, set the backplates 36–40″ apart with the centre of the glass around 62–66″ from the floor, which puts the light at face height. The shallow projection is what lets it live in a passage, beside a cabinet door, or close to the edge of a mirror.

Good to Know

SizeØ 5.7″ × H 10.2″

Projection6.7″ from the wall

WiringHardwired, key switch

DETAILS MATTER

What Makes It Special

01 Plain Brass Against Patterned Glass

One round plate, one straight arm, one elbow — no scroll, no trim, no visible fixings. The metal stays quiet so the ribbing in the glass carries the fixture.

02 A Tiered Bell, Not a Cone

The shade steps in at the shoulder, widens through the body and flares again at the rim, so the outline has three distinct changes of direction instead of one straight taper.

03 Fluted Glass Breaks the Light Up

The ribs run the full height of the shade, so light leaves as a row of fine vertical highlights and throws a fanned pattern onto the wall — texture in the glass doing what a plain shade can't.